Toshiba e-STUDIO2330C Service Manual page 1054

Hide thumbs Also See for e-STUDIO2330C:

Table of Contents

[CCD0] Stack ejection motor abnormality

Is the shutter home position sensor (PI45) normal?

Replace the sensor.

Are the wirings between the finisher controller PC board and the stack ejection motor (M32)/

shutter clutch (CL31) correct?

Correct the wirings.

Is there any problem with the shutter mechanism?

Fix the shutter mechanism.

1. Replace the stack ejection motor and shutter clutch.

2. Replace the finisher controller PC board.

[CCE0] Rear end assist motor abnormality

Is the rear end assist guide home position sensor (PI39) normal?

Replace the sensor.

Is the wiring between the finisher controller PC board and the rear end assist motor (M39)

Correct the wiring.

Is there any problem with the rear end assist mechanism?

Fix the rear end assist mechanism.

1. Replace the rear end assist motor.

2. Replace the finisher controller PC board.

[CCF0] Gear change motor abnormality

Is the gear change home position sensor (PI49) normal?

Replace the sensor.

Is the wiring between the finisher controller PC board and the gear change motor (M40)

Correct the wiring.

Is there any problem with the gear change mechanism?

Fix the gear change mechanism.

1. Replace the gear change motor.

2. Replace the finisher controller PC board.

e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C

ERROR CODE AND TROUBLESHOOTING

Show Quick Links

Chapters

Table of Contents