(5)
Remove 1 screw and take off the fixing plate.
(6)
Take off the finisher with the hole punch unit.
Note:
Be careful not to fell the finisher when
moving only the finisher unit.
(7)
Remove 1 screw and take off the connector
cover.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 28-53
Fig. 28-54
Fig. 28-55
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
28 - 21
SETTING / ADJUSTMENT OF OPTION
28