(5)
Remove 1 screw and the ground wire, and
then disconnect 1 connector.
(6)
Remove 2 screws and take off 2 fixing
brackets on the rear side.
(7)
Take off the 2nd drawer of the equipment
and PFP 1st drawer.
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 28-13
Fig. 28-14
Fig. 28-15
e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C
28 - 5
Fixing bracket
SETTING / ADJUSTMENT OF OPTION
28