Toshiba e-STUDIO2330C Service Manual page 1036

Hide thumbs Also See for e-STUDIO2330C:

Table of Contents

[F350] SLG board abnormality

Check if the conductor pattern on the SLG board is short circuited or open circuited.

If there is no problem found in the check (1) above, check the combination of the firmware

version of the system ROM, engine ROM and scanner ROM. Reinstall the scanner ROM

If an error occurs after step (2) above has been performed, replace the SLG board.

e-STUDIO2330C/2820C/2830C/3520C/3530C/4520C

ERROR CODE AND TROUBLESHOOTING

Show Quick Links

Chapters

Table of Contents