Qcl; Qos Control List - Planet Networking & Communication XGS-6320 Series User Manual

4.5.5 QCL

4.5.5.1 QoS Control List

This page shows the QoS Control List(QCL), which is made up of the QCEs. Each row describes a QCE that is
defined. The maximum number of QCEs is 256 on each switch.
Click on the lowest plus sign to add a new QCE to the list.
The page includes the following fields:
Object

QCE
 Port
 DMAC
 SMAC
 Tag Type
 VID
 PCP

DEI
Figure 4-5-5-1: QoS Control List Configuration Page Screenshot
Description
Indicates the index of QCE.
Indicates the list of ports configured with the QCE.
Specify the type of Destination MAC addresses for incoming frame. Possible
values are:
Any: All types of Destination MAC addresses are allowed.
■
Unicast: Only Unicast MAC addresses are allowed.
■
Multicast: Only Multicast MAC addresses are allowed.
■
Broadcast: Only Broadcast MAC addresses are allowed.
■
The default value is 'Any'.
Displays the OUI field of Source MAC address, i.e. first three octet (byte) of MAC
address.
Indicates tag type. Possible values are:
Any: Match tagged and untagged frames.
■
Untagged: Match untagged frames.
■
Tagged: Match tagged frames.
■
The default value is 'Any'
Indicates (VLAN ID), either a specific VID or range of VIDs. VID can be in the
range 1-4095 or 'Any'
Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or
range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or
'Any'.
User's Manual of XGS-6320 Managed Switches
337