Ip Status - Planet Networking & Communication IGS-10020HPT User Manual

Industrial l2+ multi-port gigabit poe+ managed ethernet switch
Table of Contents

Advertisement

Next Hop VLAN
Buttons
: Click to add a new IP interface. A maximum of 128 interfaces are supported.
: Click to add a new IP route. A maximum of 32 routes are supported.
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.

4.2.1.3 IP Status

IP Status displays the status of the IP protocol layer. The status is defined by the IP interfaces, the IP routes and the neighbor
cache (ARP cache) status. The screen in
notation or a valid IPv6 notation. Gateway and Network must be of the
same type.
The VLAN ID (VID) of the specific IPv6 interface associated with the
gateway.
The given VID ranges from 1 to 4095 and will be effective only when the
corresponding IPv6 interface is valid.
If the IPv6 gateway address is link-local, it must specify the next hop.
Figure 4-2-3
appears.
Figure 4-2-3: IP Status Page Screenshot
65
User's Manual of IGS PoE series

Advertisement

Table of Contents
loading

This manual is also suitable for:

Igs-10020ptIgs-20160hpt

Table of Contents