Ip Status - Planet Networking & Communication IGS-6325 Series User Manual

L3 industrial managed ethernet switch
Table of Contents

Advertisement

Next Hop VLAN
Buttons
: Click to add a new IP interface. A maximum of 128 interfaces are supported.
: Click to add a new IP route. A maximum of 32 routes are supported.
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.

4.2.1.3 IP Status

IP Status displays the status of the IP protocol layer. The status is defined by the IP interfaces, the IP routes and the neighbor
cache (ARP cache) status. The screen in
same type.
The VLAN ID (VID) of the specific IPv6 interface associated with the
gateway.
The given VID ranges from 1 to 4095 and will be effective only when the
corresponding IPv6 interface is valid.
If the IPv6 gateway address is link-local, it must specify the next hop.
Figure 4-2-3
appears.
Figure 4-2-3: IP Status Page Screenshot
60
User's Manual of IGS-6325 series

Advertisement

Table of Contents
loading

This manual is also suitable for:

Igs-6325-20s4c4xIgs-6325-20t4c4x

Table of Contents