Configuring Wired Network Settings - ViewSonic SC-T46 User Manual

4.5.3

Configuring Wired Network Settings

The Ethernet setting enables you to configure the wired network settings for your SC-T46 thin client.
Using a Dynamic IP Address
To use a dynamic IP address, please do the following:
1. On ViewSonic Client Setup, click Network > Ethernet.
2. Under the IP address section, click the drop-down menu to select DHCP for the IP type field.
NOTE
• If DHCP is selected, the DHCP server over the network will automatically assign an IP
address to your SC-T46 thin client. This is the default setting.
3. Click Save to apply.
Using a Static IP Address
To use a static IP address, please do the following:
NOTE
• It's recommended to use a dynamic IP address for your SC-T46 thin client in a
corporate network environment.
1. On ViewSonic Client Setup, click Network > Ethernet.
2. Under the IP address section, click the drop-down menu to select Static IP for the IP type field.
3. The IP address, Subnet mask, and Gateway fields appear in the IP address section.
Configuring Client Settings
Configuring Network Settings
79
79