Creating The Mapping Of Ip Addresses To Names Of Host Servers - ViewSonic SC-T46 User Manual

Configuring Client Settings
88
Configuring Network Settings
4.5.7

Creating the Mapping of IP Addresses to Names of Host Servers

ViewSonic Client Setup allows you to use the name or alias of a host server instead of its IP address wherever you
need to specify an IP address while configuring client settings. To use this feature, first you need to create the
mapping of IP addresses to names or aliases of host servers.
Creating the Mapping List
To create the mapping of IP addresses to names or aliases, please do the following:
1. On ViewSonic Client Setup, click Network > Hosts to open the Mapping list.
2. Click Add to start adding a new mapping entry.
3. Type in the name, IP address, and alias of a host server, and then click Save to apply.
NOTE
• If your host server belongs to a domain, please don't enter the FQDN (Fully Qualified
Domain Name) or full computer name in the Hostname field. Enter only the
computer name of the host server in this required field.
88