4.5.5
Establishing and Stopping a VPN connection
The VPN setting enables you to establish/stop a virtual private network connection for your SC-T46.
NOTE
• The VPN setting also allows you to configure and manage virtual private network
settings. For instructions on how to configure and manage virtual private network
settings, please refer to section "4.5.6 Configuring Virtual Private Network Settings"
on page 87.
Adding a Virtual Private Network
To add a virtual private network, please do the following:
1. On ViewSonic Client Setup, click Network > VPN to open the Virtual Private Network list.
NOTE
• If you haven't created any entry, the Virtual Private Network list will be empty.
2. Click Add on the top of the Virtual Private Network list.
Configuring Client Settings
Configuring Network Settings
83
83