ViewSonic SC-T46 User Manual page 136

Options Sub-tab
Window Settings
Item
Color Depth
Cursor Auto-hide
Use RemoteFX
Use Bulk Compression
Connection Settings
Item
USB Storage Mapping
Printer Mapping
Description
Click the drop-down menu to select the desired color depth for a Remote
Desktop session. Five options are available: Automatic, 15 Bit, 16 Bit, 24 Bit,
and 32 Bit.
NOTE: If RemoteFX is enabled, then no matter which color depth you choose
here, 32 bit per pixel will be applied.
NOTE: The Automatic option uses the setting defined by the host server.
NOTE: You can configure the upper limit of the color depth for a Remote Desktop
session on the host server. In this case, no matter which color depth you
choose here, the value cannot exceed the defined limit.
Click the drop-down menu to enable/disable the auto-hiding of the mouse cursor
or pointer on inactivity in Remote Desktop sessions.
Click the drop-down menu to disable/enable RemoteFX.
NOTE: Windows RemoteFX™ is a technology that offers a rich user experience
®
over a network for remote desktop users.
NOTE: To enable the RemoteFX feature for Remote Desktop sessions on your
SC-T46 thin client, you still need to configure the host server. For detailed
instructions on how to enable RemoteFX on a host server, please visit
Microsoft Support website at support.microsoft.com.
Click to enable/disable the bulk compression for the data traffic between the
server and client.
Description
Click the drop-down menu to enable/disable USB storage mapping.
When Enable is selected, users can access the local USB storage devices, such
as a USB flash drive and memory card reader, in a Remote Desktop session.
NOTE: ViewSonic Client Setup also allows you to enable or disable the use of
locally attached USB storage devices. You need to enable locally attached
USB storage devices first in order to use them in a Remote Desktop
session. The default is enabled.
NOTE: To configure the use of USB storage devices, please refer to section
"4.4.3 Configuring Settings for USB Storage Devices" on page 70.
Click the drop-down menu to enable/disable printer mapping.
When Enable is selected, users can access a local or network printer in a
Remote Desktop session.
NOTE: You need to add a local or network printer for your SC-T46 first, and then
enable this feature here to use that printer in a Remote Desktop session.
NOTE: For detailed instructions on how to add a local or network printer for your
SC-T46, please refer to section "4.4.6 Adding a Local Printer" on page
73 or "4.4.7 Adding a Network Printer" on page 76.
125
Configuring Client Settings
Configuring Service Access Settings
125