ViewSonic SC-T46 User Manual page 180

Server Address
Username
Password
Domain
Server Name
Common Settings
Item
Autostart When Startup
On Application Exit
Type in the IP address / URL / FQDN of the XenApp server.
NOTE: Server Connection only supports connections to XenApp servers.
Type in the user/account name used for authentication.
Type in the password of the user account used for authentication.
Type in the domain of the server.
Type in the name of the server.
Description
Select whether to open a Citrix ICA session automatically or not when your
SC-T46 is started up (Autostart mode).
NOTE: There are three similar but different modes for your SC-T46 and only one
mode will take effect if all are enabled. Three modes and the order of
priority are listed as follows:
No. Mode Description
The client will start up directly with the desired
1 Appliance Citrix ICA session and turn off after existing the
session.
The client will start up directly with the desired
Citrix ICA session and perform the configured
action after existing the session.
Available actions include:
2 Autostart
The default. The client will enter ViewSonic Quick
3 Quick Connection
Connection screen after system startup.
NOTE: To use the Autostart mode, ensure that the Appliance mode is disabled.
Select what to do when a Citrix ICA session is ended. Four options are available:
Do Nothing, Restart Application, Reboot, and Shutdown.
Option Description
Do Nothing Returns to the Local Linux desktop.
Restart Application Opens an ICA session again.
Reboot Restarts your thin client.
Shutdown Turns off your thin client.
169
Configuring Client Settings
Configuring Service Access Settings
• Returning to the local desktop
• Re-launching a new session
• Restarting the thin client
• Turning off the thin client
169