ViewSonic SC-T46 User Manual page 51

Configuring Client Settings
40
Configuring System Settings
Setting Access Privileges and Password Also for Standard Users
To set access privileges and password also for standard users, please do the following:
1. On ViewSonic Client Setup, click System > Password.
2. Under the User section, click to check Use Password.
3. The access privileges for standard users are granted and a window appears for you to set the password.
4. Type in the desired password, and then click OK to confirm.
5. Click Save to save all the changes.
NOTE
• The User section appears only when Active Admin Authorization is checked.
40