Configuring Screensaver Settings - ViewSonic SC-T46 User Manual

Configuring Client Settings
68
Configuring User Interface Settings
4.3.7

Configuring Screensaver Settings

To configure screensaver settings for your SC-T46, please do the following:
1. On ViewSonic Client Setup, click User Interface > Screensaver.
2. Click drop-down menus or tick/untick checkboxes to choose desired settings.
Screensaver
Item
Enable Screensaver
Display Mode
Display After (minute)
Enable Display Sleep Mode
Enter Display Sleep Mode after
Screensaver (minute)
On Resume, Password Protect
3. Click Save to apply.
Check/Uncheck to enable/disable Screensaver.
Click to select the display mode of the screensaver. Two options are available:
Blank and Logo.
Option
Blank
Logo
Click to select the wait time for screensaver.
Check to turn off (i.e. stop sending signals to) the display to maximize the
energy savings.
Click to select when to turn off (i.e. stop sending signals to) the display after
Screensaver starts.
Check/Uncheck to resume with/without a password.
TIP
• While setting wait time for screensaver, you can hang your mouse over the Up/
Down arrow to quickly scroll up/down the Minute list.
Description
Description
Displays a black screen.
Displays the ViewSonic floating logo.
68