Updating Firmware For Your Sc-T46 - ViewSonic SC-T46 User Manual

184
A.2 Updating Firmware for Your SC-T46
Four ways are available to update firmware for your SC-T46:
Method
ViewSonic Thin Client Menu
ViewSonic Client Setup
ViewSonic Device Manger
Using ViewSonic Thin Client Menu
To update firmware using ViewSonic Thin Client Menu, please do the following:
1. Connect your thin client to the network, and then restart it.
2. During the POST (Power-On Self-Test) period, press Esc on the keyboard to enter ViewSonic Thin Client Menu.
3. Select Firmware update and then follow the on-screen instructions to complete the task.
Using ViewSonic Client Setup
To update firmware using ViewSonic Client Setup, please refer to section "4.2.6 Updating Firmware from the
Management Computer" on page 43.
Using ViewSonic Device Manager
To update firmware using ViewSonic Device Manager, please refer to the User's Manual for ViewSonic Device
Manager.
Downloads firmware from a remote computer and updates firmware for your thin client.
Initiates firmware update locally on the thin client with the help of ViewSonic Client
Setup.
Initiates firmware update remotely on the remote computer with ViewSonic Device
Manager.
NOTE
• You need to specify the IP address of the firmware server over the network. A
firmware server is the server where ViewSonic Device Manager is installed and client
firmware files are imported through ViewSonic Device Manager.
• For more information about ViewSonic Device Manager, please refer to the User's
Manual for ViewSonic Device Manager.
Description
184