ViewSonic SC-T46 User Manual page 133

Configuring Client Settings
122
Configuring Service Access Settings
Common Settings
Item
Autostart When Startup
On Application Exit
Description
Select whether to open a Remote Web Access session automatically or not when
SC-T46 is started up (Autostart mode).
NOTE: There are three similar but different modes for your SC-T46 and only one
mode will take effect if all are enabled. Three modes and the order of
priority are listed as follows:
No. Mode Description
The client will start up directly with the desired
1 Appliance Microsoft RDP session and turn off after existing
the session.
The client will start up directly with the desired
Microsoft RDP session and perform the configured
action after existing the session.
Available actions include:
2 Autostart
The default. The client will enter ViewSonic Quick
3 Quick Connection
Connection screen after system startup.
NOTE: To use the Autostart mode, ensure that the Appliance mode is disabled.
Select what to do when a Remote Web Access session is ended. Five options
are available: Do Nothing, Restart Application, Force-Restart Application,
Reboot, and Shutdown.
Option
Do Nothing
Restart Application
Force-Restart Application
Reboot
Shutdown
122
• Returning to the local desktop
• Re-launching a new session
• Restarting the thin client
• Turning off the thin client
Description
Returns to the SC-T46 local Linux desktop.
Opens a Remote Web Access session again.
Opens a Remote Web Access session again and
skips any messages in-between.
Restarts your SC-T46.
Turns off your SC-T46.