ViewSonic SC-T46 User Manual page 24

Mounting with Another VESA Bracket (SC-T46)
In case that your SC-T46 uses a non-standard stand with the wireless module (SC-T46 (with WiFi)), a different VESA
bracket will be provided for you to mount your SC-T46 (with WiFi) on the back of a monitor.
To mount your SC-T46 (with WiFi), follow the steps below:
1. Align two mount holes on the VESA bracket with two mount holes on your SC-T46 (with WiFi), and then
secure the bracket to your SC-T46 (with WiFi) with two (2) screws as shown below.
2. Align the mount holes on the VESA bracket with the mount holes on the monitor, and then secure the
bracket and SC-T46 (with WiFi) to the monitor with two (2) screws as shown. Ensure that your SC-T46 (with
WiFi) is located in the center of the monitor and the rear panel of your SC-T46 (with WiFi) is facing rightward
as shown below.
Setting Up Your SC-T46
13
Positioning Your SC-T46
Have SC-T46 (with
WiFi)'s rear panel facing
rightward.
13