ViewSonic SC-T46 User Manual page 65

Configuring Client Settings
54
Configuring System Settings
3. Click Collect Log. A window appears prompting you to choose where to save the log file set (named
events.tar.gz). The attached USB flash drive is the default location if attached. Click Save to apply.
Capturing Error-Related Screens
To capture error-related screens of your SC-T46, please do the following:
1. On ViewSonic Client Setup, click System > Error Report.
2. Click Launch Snapshot to open the screen capturing program.
3. Configure screen capturing settings directly on the opened window if needed, and then click OK to capture
the desired screen.
TIP
• It's recommended to set the delay time before capturing to at least 2 seconds to
reserve time for switching to the desired screen or window.
• It's recommended to save the captured screens in the same USB flash drive where
the event logs were saved.
• Please note that files saved on the local desktop will be deleted after restart.
54