ViewSonic SC-T46 User Manual page 161

Configuring Client Settings
150
Configuring Service Access Settings
Common Settings
Item
Autostart When Startup
On Application Exit
Description
Select whether to open a browser session for Citrix service access automatically
or not when your SC-T46 is started up (Autostart mode).
NOTE: There are three similar but different modes for your SC-T46 and only one
mode will take effect if all are enabled. Three modes and the order of
priority are listed as follows:
No. Mode Description
The client will start up directly with the desired
1 Appliance Citrix ICA session and turn off after existing the
session.
The client will start up directly with the desired
Citrix ICA session and perform the configured
action after existing the session.
Available actions include:
2 Autostart
The default. The client will enter ViewSonic Quick
3 Quick Connection
Connection screen after system startup.
NOTE: To use the Autostart mode, ensure that the Appliance mode is disabled.
Select what to do when a browser session for Citrix service access is ended.
Four options are available: Do Nothing, Restart Application, Reboot, and
Shutdown.
Option Description
Do Nothing Returns to the Local Linux desktop.
Restart Application Opens a browser session again for service access.
Reboot Restarts your thin client.
Shutdown Turns off your thin client.
150
• Returning to the local desktop
• Re-launching a new session
• Restarting the thin client
• Turning off the thin client