Configuring Client Settings
46
Configuring System Settings
1. On ViewSonic Client Setup, click System > Appliance Mode.
2. Click to check Enable Appliance Mode.
3. Other settings of the Appliance mode appear.
NOTE
• Please note that the Autostart mode also enables the client to start up directly with
an RDP / ICA / View session and provides more configuration flexibility than the
Appliance mode. For detailed information on the Autostart mode, please refer to
the following sections:
"4.6.5 Configuring Advanced RDP Connection Settings" on page 114
"4.6.8 Configuring Advanced ICA Connection Settings" on page 148
"4.6.11 Configuring Advanced View Connection Settings" on page 176
46