ViewSonic SC-T46 User Manual page 91

Configuring Client Settings
80
Configuring Network Settings
4. Type in the IP address, subnet mask, and gateway for your SC-T46 thin client.
5. Click Save to apply.
Obtaining DNS Server Addresses Automatically
To obtain DNS Server addresses automatically, please do the following:
1. On ViewSonic Client Setup, click Network > Ethernet.
2. Under the DNS section, click the drop-down menu to select Dynamic DNS (via DHCP) for the DNS type field.
3. Click Save to apply.
Specifying DNS Server Addresses Manually
To specify DNS Server addresses manually, please do the following:
1. On ViewSonic Client Setup, click Network > Ethernet.
2. Under the DNS section, click the drop-down menu to select Manual setting.
3. The Search domain, Nameserver 1, and Nameserver 2 fields appear in the DNS section.
NOTE
• Consult your network administrator for a free IP address and other required data
about the network to which your SC-T46 connects.
• The red asterisks indicate the required fields.
NOTE
• You need to further specify DNS server addresses manually if you choose to use a
static IP address.
NOTE
• You cannot obtain DNS server addresses automatically through the DHCP server if
you choose not to get the IP address via the DHCP server.
80