ViewSonic SC-T46 User Manual page 55

Configuring Client Settings
44
Configuring System Settings
5. Click the drop-down menus to select the desired firmware version and other update options.
Firmware Update Options
Item
Firmware Version
Language
Reboot Immediately
Keep the User Data
6. Click Update firmware to confirm your selections. The system will start updating its firmware after restart.
Click to select the desired firmware version.
Click to select the interface language of the system, including the
ViewSonic Client Setup console.
NOTE: Available languages may vary with the selected firmware version.
Click to choose whether to restart the system immediately for firmware update
or manually restart the system later.
Click to choose if to keep the setting values under ViewSonic Client Setup.
NOTE: If Yes is selected, all setting values under ViewSonic Client Setup will
remain unchanged after firmware update.
If No is selected, all setting values will be restored to the factory default.
This option may not be available on your system.
NOTE: If the client is managed by ViewSonic Device Manager and here No is
selected, ViewSonic Device Manager will fail to manage the client after
firmware update. For more information on ViewSonic Device Manager,
please refer to the User's Manual for ViewSonic Device Manager.
44
Description