Establishing And Stopping A Wireless Connection - ViewSonic SC-T46 User Manual

4.5.9

Establishing and Stopping a Wireless Connection

The Wireless setting enables you to establish/stop a wireless connection for your SC-T46 thin client.
NOTE
• Before you can access available wireless networks, you need to install an external
and USB-based wireless network adapter for your SC-T46. Ensure that you have set
up the required wireless network adapter.
• Your SC-T46 package may not include a wireless network adapter (optional). Please
contact your dealer for compatible adapters if needed. It's recommended to check
with your dealer first if you plan to purchase one by yourself.
• The Wireless setting also allows you to configure and manage wireless network
settings. For details on how to configure and manage wireless network settings,
please refer to section "4.5.10 Configuring Wireless Network Settings" on page 94.
Establishing a Wireless Network Connection
To establish a wireless network connection for your SC-T46 thin client, please do the following:
1. On ViewSonic Client Setup, click Network > Wireless to open the Wireless Network list.
NOTE
• Your SC-T46 will perform network discovery once and specify all available wireless
networks. To refresh, click Scan on the top of the Wireless Network list.
2. Click to check the desired wireless network. The Connect
Wireless Network list.
Configuring Client Settings
Configuring Network Settings
button then appears on the top of the
91
91