ViewSonic SC-T46 User Manual page 28

Topic 1: Powering On Your SC-T46
To start using your SC-T46, please do the following:
1. Ensure that your monitor is connected and turned on.
NOTE
• Please note that you need to connect and turn on your monitor before powering
up the thin client. Otherwise, the client may fail to set an appropriate resolution
for the connected monitor.
2. Press the Power button to turn on the client. Wait a moment for ViewSonic Quick Connection screen to
appear.
Topic 2 to set the time zone for the first time use.
3. (a) Go to
Topic 4
(b) Go to if the time zone had been set.
Power Off Click the icon to suspend, shut down, or restart the system.
Click the icon to enter the local Linux desktop.
Local Desktop
To return to this screen from the local Linux desktop, see
Setup Click the icon to launch ViewSonic Client Setup.
Mixer Click the icon to configure audio settings.
Indicates the network type (wired or wireless) and status.
Network
Click the icon to configure network settings.
ViewSonic Quick Connection Screen
17
Getting Started
Learning the Basics
Mixer Network
Topic 3.
17