Installation - Yamaha VX600ERG Service Manual

RECOIL STARTER

INSTALLATION

1. Wind:
•
Starter rope (2-1/2 times counterclockwise)
(in the sheave drum)
2. Install:
•
Starter spring 1
•
Sheave drum assembly 2
NOTE:
•
Mesh the spring hook 3 with the case slit, then
wind the spring counterclockwise into the case
from a larger to a smaller diameter.
•
Mesh the sheave drum hook 4 with the spring
SEA5660
hook 5.
3. Install:
•
Drive pawl 1
•
Cam guide 2
•
Drive plate 3
NOTE:
The cam guide 2 should not be on top of the drive
pawl 1.
SEA5670
4. Pull about 102 mm (4 in) of starter rope out of the
cutout portion in the sheave drum and rotate the
sheave drum 4-1/2 times counterclockwise to
preload the starter spring.
SEA5680
NOTE:
Pass the rope through the case hole and make a
knot 1 in the rope so that the rope is not pulled into
the case.
SEA5690
5-29
ENG