Assembly - Yamaha VX600ERG Service Manual

C
b
PRIMARY SHEAVE AND DRIVE V-BELT
D
SEA4140
SEA4150
a
SEA4160
NOTE:
When replacing the weight and roller bushings, use
the YXR clutch bushing jig kit.
YXR clutch bushing jig kit:
YS-39752
Ç Removing
Î Installing

ASSEMBLY

1. Install:
•
Sliding sheave
(onto the spider)
NOTE:
Be sure the sliding sheave match mark (X) is aligned
with the spider match mark (X).
2. Install:
•
Fixed sheave
(onto the spider)
NOTE:
•
Clean the threads.
•
®
Apply LOCTITE
shown.
CAUTION:
®
LOCTITE should be applied only to the specified
area. Never apply it to the bushings and other
areas.
a 16 mm (0.63 in)
b 30 ~ 35 mm (1.18 ~ 1.38 in)
4-7
POWR
TR
#648 to the fixed sheave as