K Fuel tank breather hose
L Ground lead
M Install the clamp so that it does
not come into contact with the
ground lead terminal.
N Route the fuel tank breather hose
behind the condenser. (SX600/
MM600)
O Condenser (SX600/MM600)
P Fasten the CDI unit leads with a
plastic band. For the SX600/
MM600, include the condenser
leads.
Q CDI unit
R Pass the CDI unit lead behind the
footrest.
S Condenser coupler (SX600/
MM600)
T Load control relay (with the white
coupler)
U Headlight relay (with the black
coupler)
V Rectifier/regulator
CABLE ROUTING
9-30
SPEC