Yamaha VX600ERG Service Manual page 19

SEA2070
14. Install:
•
Gasket (bleed bolt)
•
Bleed bolt
15. Install:
•
Rear bracket (right)
M8 mounting bolt (rear):
M10 mounting bolt (rear):
16. Install:
•
Carburetors
Refer to "CARBURETORS" in CHAPTER 7.
Cable adjustment
NOTE:
Before adjusting the oil pump cable, the throttle cable
free play should be adjusted.
Adjustment steps:
•
Slide back the adjuster cover.
•
Loosen the locknut 1.
•
Turn the adjuster 2 in or out until the specified
distance a is obtained.
Distance:
SEA2080
Turning in → Distance a is increased.
Turning out → Distance a is decreased.
•
Tighten the locknut and push in the adjuster
cover.
2-5
INSP
OIL PUMP
ADJ
33 Nm (3.3 m · kg, 24 ft · lb)
57 Nm (5.7 m · kg, 41 ft · lb)
23 ± 1 mm (0.906 ± 0.039 in)