INSPECTION
1. Inspect:
•
Handlebar 1 (VX600ER/SX600/VT600)
•
Handlebar 2 (MM600)
•
Steering column 3
Bends/cracks/damage → Replace.
WARNING
Do not attempt to straighten a bent column.
SEA3040
This may dangerously weaken the column.
2. Inspect:
•
Bearings (steering column) 1
•
Collars 2
Wear/damage → Replace.
•
Steering column 3 (bearing contact sur-
faces)
Scratches/wear/damage → Replace.
SEA3050
3. Inspect:
•
Relay rod 1
•
Tie rods 2
Bends/cracks/damage → Replace.
WARNING
Do not attempt to straighten bent rods. This may
dangerously weaken the rods.
SEA3060
4. Check:
•
Rod end movement
Rod end free play exists → Replace the rod
end.
Rod end turns roughly → Replace the rod end.
SEA3070
5. Inspect:
•
Relay arm
Cracks/damage → Replace.
SEA3080
3-4
CHAS
STEERING