AC MAGNETO
REMOVAL
1. Remove:
•
Bolts 1
•
Starter pulley 2
•
Nut 3
NOTE:
Attach the primary sheave holder to hold the primary
sheave.
SEA5570
Primary sheave holder:
2. Remove:
•
Magneto rotor 1
NOTE:
•
Remove the magneto rotor using the rotor
puller 2.
•
Fully tighten the tool holding bolts, making sure the
tool body is parallel with the magneto rotor. If
necessary, one screw may be backed out slightly
SEA5580
to level the tool body.
Rotor holding puller:
5-24
ENG
90890-01701, YS-01880
90890-01362, YU-33270