Troubleshooting - Yamaha VX600ERG Service Manual

TROUBLESHOOTING

Check the tail/brake light bulb.
Refer to "LIGHTING SYSTEM".
OK NO CONTINUITY
For VX600ER/VT600:
Check the main fuse,
"IGNITION" fuse and "TAIL" fuse.
Refer to "FUSE INSPECTION" in CHAPTER 2.
OK FAULTY
For VX600ER/VT600:
Check the battery.
Refer to "BATTERY INSPECTION" in CHAPTER 2.
OK OUT OF SPECIFICATION
For SX600/MM600:
Check the condenser.
Refer to "IGNITION SYSTEM".
OK OUT OF SPECIFICATION
Check the stator coil and pickup coil.
Refer to "IGNITION SYSTEM".
OK OUT OF SPECIFICATION
Check the main switch.
Refer to "IGNITION SYSTEM".
OK FAULTY
Check the brake light switch.
OK FAULTY
Check the load control relay.
Refer to "IGNITION SYSTEM".
OK FAULTY
Correct the connection and/or
replace the rectifier/regulator
and/or CDI unit.
BRAKE LIGHT DOES NOT COME ON.
Replace the bulb.
Replace the main fuse, "IGNITION" fuse and/or "TAIL"
fuse.
Replace and/or charge the battery.
Refer to "BATTERY CHARGING" in CHAPTER 2.
Replace the condenser.
Replace the stator coil assembly.
Replace the main switch.
Replace the brake light switch.
Replace the load control relay.
8-30
SIGNAL SYSTEM
– +
ELEC