Network Menu - Toshiba e-STUDIO 332s User Manual Advanced

List of the Device Setting Menu Items
EPSON Character Pitch
FX Setup
Character Set
Symbol Set
Letter O Style
Zero Character
Line Pitch
White Page Skip
CR Function
Line Length
Form Length
TOF Position
Left Margin
Fit to Letter
Text Height

Network Menu

Memo
To enable the settings changed in the [Network Control] menu, the network card must be restarted. Follow the instructions on
the confirmation screen displayed when changing the settings, and restart the network card.
Network TCP/IP
Setting
IP Version
NetBEUI
NetBIOS over TCP
NetWare
EtherTalk (e-STUDIO403S Only)
Frame Type
Item
Item
Factory
Default
10CPI Specifies character pitch in this emulation.
SET-2 Specifies a character set.
IBM-437 Specifies a symbol set.
Disable Specifies the style that replaces 9BH with
letter o and 9DH with a zero.
Normal Sets the zero to be slashed or unslashed.
6LPI Specifies the line spacing.
OFF Selects whether blank pages are printed
or not.
CR Selects whether a received carriage return
character (0Dh) also causes a line feed.
80 Column Specifies the number of characters per
line.
11 or 11.7 Specifies the length of paper.
inch
0.0 inch Specifies the distance of print from the top
edge of the paper.
0.0 inch Specifies the distance of print from the left
hand edge of the paper.
Disable Sets the printing mode that can fit print
data, equivalent to 11 inches (66 lines), in
the LETTER-size printable area.
Same Sets the height of a character.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.
Factory
Default
Enable Sets whether to enable TCP/IP.
IPv4 Selects the IP version.
IPv6 can be selected only by Telnet. When
IPv6 is selected by Telnet, the screen
before selecting items, [IPv6] is dis-
played, and on the screen after selecting
items, nothing is selected.
Display condition:TCP/IP protocol is
enabled.
Disable Sets whether to enable NetBEUI.
Enable Sets whether to enable NetBIOS over TCP.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
Disable Sets whether to enable NetWare.
Disable Sets whether to enable EtherTalk.
Auto Selects a frame type.
Display condition:Netware is enabled.
- 94 -
Description
Description