Manual Transmission; Transmission To Multiple Destinations (Broadcast) - Toshiba e-STUDIO 332s User Manual Advanced

Various Functions for Transmission
Press the to select [Fax Functions]
3
and then press
Press the to select [Memory Tx] and
4
then press .
OK
Press the to select [OFF] and then
5
press .
OK
Press the until the fax standby screen
6
appears.
Place your document with text face up in the
7
ADF or face down on the document glass.
Specify a destination.
8
Press .
9
M
ONO

Manual Transmission

Manual sending (On-hook dial)
Press the <FAX/HOOK> key and confirm the
receiving tone of the destination, then send.
Press the <FAX/HOOK> key to light up
1
in blue.
Set the document on the auto document
2
feeder or document glass.
Press the <FAX/HOOK> key and input
3
the fax number of the destination.
Set the fax function as necessary.
4
After the receiving tone (peep) of the
5
destination is heard, press the Mono
start key to start sending.
You can transmit faxes manually when the
recipient uses manual reception mode or when
you want to send a fax after talking on the phone.
Note
You can scan only a single page when using the document
glass for manual transmission.
You need to connect an external telephone to the machine
to send faxes manually.
The following functions are unavailable in manual
transmission:
- broadcast
- transmission at the specified time
- Fcode transmission
- ID check transmission
- check broadcast destinations
- (Pressing Dial Twice confirm dial)
Memo
You do not have to disable memory transmission.
.
OK
Even if the start screen other than the fax functions is
displayed in the machine, you can perform manual
transmission by lifting the handset.
Pick up the handset.
1
Dial a number.
2
Place your document with text face up in the
3
ADF or face down on the document glass.
Configure the fax functions if necessary.
4
When you hear a Fax tone, press
5
to start transmission.
You can put down the handset.
Memo
When putting down the handset, after the transmission is
complete, the display screen of the machine returns to the
screen displayed before the manual transmission.
If you keep picking the handset, you can talk to your
destination.
Transmission to Multiple
Destinations (Broadcast)
This function allows you to transmit faxes to
multiple destinations at the same time. You can
specify up to 100 destinations using the ten-key
pad, speed dial, and group lists of destinations.
Place your document with text face up in
1
the ADF or face down on the document
glass.
Press the <FAX/HOOK> key.
2
Check that [Fax] is selected and press
3
to open the fax start screen.
OK
Check that [Add Destination] is
4
selected and then press
Specify a destination.
5
Repeat steps 4 to 5 to enter all the
6
destinations.
When you have specified all the
7
destinations, press
[Please press Start key to begin
8
transmission. To delete, select address
and press Delete.] appears.
If specified all the destination appears,
9
press
M
ONO
Memo
Press the <RESET/LOG OUT> key to cancel the
operation.
- 20 -
.
OK
.
M
ONO
.
M
ONO