Toshiba e-STUDIO 332s User Manual Advanced page 100

List of the Device Setting Menu Items
*1 A message appears confirming you that making changes automatically restarts the system.
Select [Yes] to continue. Select [No] to cancel.
*2 A message appears confirming you that execution automatically restarts the system. Select
[Yes] to continue. Select [No] to cancel.
*3 A message appears confirming you that execution deleted all job logs. Select [Yes] to con-
tinue. Select [No] to cancel.
User Install
Time Zone
Set Daylight Saving
Time Auto Setup
Setup
Manual Setup
Power Power Save Enable
Save
Sleep
Auto Power Off
High Humid Mode
MF(Tone)/DP(Pulse)
Reception Mode
DRD Type
Dial Tone Detection
Busy Tone Detection
Monitor Control
Monitor Volume
TTI Reg- TTI 1
ister/Edit
TTI 2
TTI 3
Standard TTI
TTI Number
TTI Calendar Type
Super G3
*1
Erase Privacy Data
*1 A message appears confirming you that continuing deletes all settings and registered data.
Select [Yes] to continue. Select [No] to cancel.
Note
If you use the machine for a long time when [Power Save] is [OFF], it may affect the lifetime of electronic components.
Item
SNTP Server (Primary)
SNTP Server (Secondary)
Execute
Factory
Default
0:00 Sets your time zone in relation to GMT.
Available range: -12:00 to + 13:00. (15
minutes / increment)
ON Sets whether to enable the Daylight
Saving mode.
Manual Setup Sets the SNTP server to use for setting the
current date and time. Maximum 64
characters.
Sets the current date and time manually.
ON Sets whether to enable the power save
mode.
ON Sets whether to enable the sleep mode.
Auto Config Sets the behavior of automatic power off.
OFF Sets whether to enable the humidity
mode.
Tone Selects a dialing method.
Fax Ready Sets the reception mode.
Mode
Type1 Sets the DRD Type.
ON Sets whether to detect a dial tone.
ON Sets whether to detect a busy tone.
OFF Select any one from three choices: Not
to monitor. Monitor till receiving/transmit-
ting the first valid facsimile signal. Execute
monitoring during communication.
Middle Sets the Monitor Volume.
(NULL) Registers or changes the transmission ter-
minal identification (the name of a
sender). Maximum 22 characters.
TTI 1 Selects the default sender's name from
the registered list.
(NULL) Registers your fax number.
dd/mm/yyyy Sets the calendar date format of sender's
or mm/dd/ information.
yyyy
ON Sets whether to use Super G3 (ultra high-
speed communication mode).
All entered data including E-mail
addresses and speed dialing data, jobs,
and logs are deleted. All printer settings
are returned to the factory defaults.
- 100 -
Description