Network Scanner Setup Tool - Toshiba e-STUDIO 332s User Manual Advanced

Mac OS X Utilities
Enter your password into [Enter
3
Password] and click on [OK].
- The default password is the last 6 alphanumerical
digits of the MAC MAC address.
- The password is case sensitive.
Click [OK] on the confirmation window.
4
Opening a Webpage
Launch Network Card Setup.
1
Select the machine.
2
Select [View Printer Web Pages] from
3
the [Printer] menu .
The webpage will restart, and the machine status
page will be displayed.
Quit Network Card Setup
Select [Quit] from the [File] menu.
1

Network Scanner Setup Tool

When carrying out a scan through the network
for the first time with Mac OS X, launch the
network scanner setup tool to set the connection
target.
It is not necessary to set the connection target
after the first time.
Memo
For the following procedure, Adobe Photoshop CS3 will be
used as an example. The details may differ depending on
the application you are using.
The Network Scanner Setup Tool is installed at the same
time as the scanner driver.
The Network Scanner Setup Tool can be launched from
[Network Scanner Setup Tool] within [Applications]>
[TOSHIBA]>[Scanner].
Carry out a network scan for the
first time.
Press the <Scan> button on the control
1
panel.
The original can be set by an automatic
2
document feeder or the document glass.
Press , select [Remote PC], and press
3
.
OK
Launch Adobe Photoshop CS3 on your
4
computer.
Select [Import] from [File], and select
5
[TOSHIBA e-STUDIOxxxS Network].
When carrying out a network scan for the
6
first time, a dialog box informing you
that the connection selection tool is
being started will be displayed, so click
[OK].
Select the connection destination from
7
the [Scan Settings] dialog box, register
information as required and click on
[OK].
From [File] within Adobe Photoshop
8
CS3, select [Import] and select
[TOSHIBA e-STUDIOxxxS Network].
A window is displayed.
Click the scan button .
9
Reading will start.
Select [Quit Photoshop] from
10
[Photoshop].
- 128 -