Checking Machine Status; Changing Administrator's Password; Changing Machine Settings - Toshiba e-STUDIO 332s User Manual Advanced

Click [SKIP].
3
If you have made changes to the settings on this
screen, click [OK].
The menus available only for the administrator will
be displayed.
Changing the Administrator's
password.
You can change the machine administrator's
password from the webpage. The administrator's
password set on the webpage can be used when
logging into the machine through the control
panel or through webpage.
Memo
The password should be 6-12 characters long, and should
be in half-byte (normal English) characters.
The password is case sensitive.
Launch your web browser and enter the
1
machine's IP address.
Select [Administration Settings].
2
Select [Management]>
3
[Administrator Password].
Enter a new password in [New
4
Password].
Reenter the password in [Confirm
5
Password].
The entered password will not be displayed. Write
down your password and store it in a safe place.
Click on [Send].
6
The network system reboots to enable the new
settings.
Memo
You do not need to restart the machine. Next time when
you log in as the administrator, use the new password.
Utilities common to Windows/Mac OS X

Checking Machine Status

You can check the status of your machine from
the webpage.
Launch your web browser and enter the
1
machine's IP address.
The status of the machine is displayed.
Memo
When logging in as the administrator, you can also click on
[Status Window] in order to view the simplified display
of the machine status.

Changing Machine Settings

You can change the main unit's settings from the
webpage.
Launch your web browser and log in as
1
the administrator.
Change the settings and click [Send].
2
Get the Date and Time Automatically
You can get date and time information
automatically from an Internet time server, and
reflect this on your machine.
Launch your web browser and log in as
1
the administrator.
Select [Administrator Setup].
2
Select [Initial Operating Settings]>
3
[Time Setup].
Specify your time zone.
4
Select [Automatic] from [Set time].
5
Enter the SNTP server in [SNTP Server
6
(Primary)].
If required, enter another SNTP server in
7
[SNTP Server (Secondary)].
Click on [Send].
8
The network system reboots to enable the new
settings.
Memo
When using SNTP, you cannot set the time from the
operating panel.
- 105 -
7