Using Ica Driver - Toshiba e-STUDIO 332s User Manual Advanced

Using Drivers and Software
Starting a Scan Job
Memo
The explanations in this section use PaperPort as an
example, and may differ from the description depending
on your application.
Place your document with text face up in
1
the ADF or face down on the document
glass.
Press the <SCAN> key.
2
Press the to select [Remote PC] and
3
then press .
OK
Start PaperPort on your computer.
4
Click [Select] and then click
5
[WIA: eS332/403S].
Click [Scan].
6
Select a paper feeding method.
7
Select a document type.
8
Specify the area to be scanned.
9
Click [Scan].
10
Click [Cancel] when scanning is finished.
11
When there is no continued page or the
12
back side is not scanned, click [Finish].
The scanned image is displayed in PaperPort.
Using Windows FAX and Scan
"Windows FAX and Scan" is a function used in
Windows Vista/ 7.
Place your document with text face up in
1
the ADF or face down on the document
glass.
Press the <SCAN> key.
2
Press the to select [Remote PC] and
3
then press .
OK
Click [Start] on your computer, and
4
select [All Programs]> [Windows FAX
and Scan].
Click [New Scan].
5
Select [eS332/403S] and click [OK].
6
Make additional setting if necessary.
7
Click [Scan].
8
Exit [Windows FAX and Scan].
9

Using ICA Driver

The ICA driver is not compatible with the
Windows OS.
The ICA driver supports the Mac OS X 10.6/10.7.
Start to read
Note
Some examples of image capture are used in the following
procedure. The steps and menus may differ depending on
the application you use.
Press the <Scan> key on the control
1
panel.
Place your document with text face up
2
inthe ADF or face down on the document
glass.
Press the
3
then press
Start image capture on your computer.
4
Select the machine from the list at the
5
left to the image capture screen.
Click the <Scan>.
6
Scanning will start.
From the [Image Capture], select
7
[Close Image Capture].
Change settings
You can adjust the document scan by changing
the current driver settings.
The following explains each item to set.
- 42 -
to select [Remote PC] and
.
OK