Toshiba e-STUDIO 332s User Manual Advanced page 38

Advanced Operations for Scanning, Internet Faxing and Scanning to Fax Server
Select [Enter] and then press
8
Re-enter the password.
9
Select [Enter] and then press
10
Press the to select [Enable] from
11
[Disable], [Enable] and [Apply
Default Password] and then press
Set the authentication password.
Press the and then enter the password.
12
Select [Enter] and then press
13
Re-enter the password.
14
Select [Enter] and then press
15
Select the permission to print the
16
document and then press
- When the encryption level is set to [Low] in step
5, you can select [Not Allowed] or [High
resolution].
- When the encryption level is set to [Middle] or
[High] in step 5, you can select [Not Allowed]
[low resolution (150dpi)] or [High resolution].
Select the permission to copy the text
17
and object and then press
Select the permission to change the PDF
18
file and then press
- When the encryption level is set to [Low] in step
5, you can select [Not Allowed], [Allow To
Make A Comment], [Allow To Swap Page], or
[Allow all op. except pg extract.]
- When the encryption level is set to [Medium] or
[High] in step 5, you can select [Not Allowed],
[Allow To Make A Comment], [Allow Ins., Del.
or Rotate Page.], or [Allow all op. except pg
extract.]
Check the security settings and then
19
press .
OK
Note
The settings of each authentication in steps 16 to 18 are
displayed only when [Permissions Password] is set for
[Enable] or [Apply Default Password]
.
OK
.
OK
OK
.
OK
.
OK
.
OK
.
OK
.
OK
Use the default password
When [Use the default password] is selected
in step 6 or 11 in
opening a document and authentication
password" P.
password registered in advance.
Use the procedures below to register the initial
.
password.
Press the <SETTING> key.
1
Press the
2
Setup] and then press
Enter the administrator password.
3
Select [Enter] and then press
4
Press the
5
and then press
Press the
6
Settings] and then press
Press the
7
Setting] and then press
Press the
8
Password]/[Permissions Password]
and then press
Enter a password up to 32 characters.
9
Select [Enter] and then press
10
Press the
11
displayed.
- 38 -
"Setting a password for
37, you can use the default
to select the [Admin
.
OK
to select [Scanner Setup]
.
OK
to select [Default
OK
to select [Encrypted PDF
OK
to select [Document Open
.
OK
until the top screen is
.
OK
.
.
.
OK