Toshiba e-STUDIO 332s User Manual Advanced page 14

Useful Functions
Press the or
6
margin for [Front] and then press the
- To create a margin at the top of the output,
specify a positive value.
- To create a margin at the bottom of the output,
specify a negative value.
Press or to specify the [Left]
7
margin for [Front] and then press
- To create a margin on the left side of the output,
specify a positive value.
- To create a margin on the right side of the output,
specify a negative value.
Memo
You do not have to specify the [Back] margin when
copying on a single side.
Press the until the copy start screen
8
appears.
Enter the number of copies.
9
Press .
10
M
ONO
Memo
[Margin] is disabled when all the values are set to [0].
When Making Duplex Copies
When you make duplex copies with [Margin]
enabled, you must specify the [Back] margin.
Press the <COPY> key.
1
Place your document with text face up in
2
the ADF or face down on the document
glass.
Specify [Duplex Copy] as you want.
3
Reference
For details, refer to the User's Manual Basic.
Press the to enter the [Change
4
settings] menu.
Press the to select [Margin] and then
5
press .
OK
Press the to select [ON] and then
6
press .
OK
Press the or
7
margin for [Front] and then press the
- To create a margin at the top of the output,
specify a positive value.
- To create a margin at the bottom of the output,
specify a negative value.
to specify the [Top]
OK
to specify the [Top]
Press
8
margin for [Front] and then press
.
the .
- To create a margin on the left side of the output,
specify a positive value.
- To create a margin on the right side of the output,
specify a negative value.
Press
9
.
margin for [Back] and then press the
- To create a margin at the top of the output,
specify a negative value.
- To create a margin at the bottom of the output,
specify a positive value.
Memo
Specify the same absolute value set in the [Top]
margin for both the [Front] and [Back] margins.
Press the
10
margin for [Back] and then press
- To create a margin on the left side of the output,
specify a negative value.
- To create a margin on the right side of the output,
specify a positive value.
Memo
Specify the same absolute value set in the [Left]
margin for both the [Front] and [Back] margins.
Press the
11
screen appears.
Enter the number of copies.
12
Press
13
Memo
The position of margin is according to [Direction] of the
document.
If [Direction] of the document image is [Portrait], the
short edges are located in top and bottom edges, and long
edges are located in the right and left edges. If
[Direction] of the document image is [Landscape], the
long edges are located in right and left edges and the short
edges are located in the top and bottom edges.
When you use the document glass, the continuous scan
mode is automatically enabled. Follow the instructions
displayed on the display screen.
[Margin] is disabled when all the values are set to [0].
.
- 14 -
or to specify the [Left]
or to specify the [Top]
or to specify the [Left]
until the copy standby
.
M
ONO
.
.
OK