Toshiba e-STUDIO 332s User Manual Advanced page 138

Network Setting Items
Web
TELNET
page
- Auth Key
Authenticati Auth
on Settings Algorithm
Algorithm
Encryption Privacy
Settings Passphrase
Passphrase
- Privacy Key
Encryption Privacy
Settings Algorithm
Algorithm
New SNMP Read
Read Community
Community
New SNMP Write
Write Community
Community
SNMP Trap
Web
TELNET
page
Printer Trap Prn-Trap
Community Community
Name Set
Address 1-5 TCP #1-5
Trap
Address
Trap Enable TCP #1-5
1-5 Trap Enable
Printer TCP #1-5
Reboot 1-5 Printer
Reboot Trap
Receive TCP #1-5
Illegal Trap Receive
1-5 Illegal Trap
Online 1-5 TCP #1-5
Online Trap
Offline 1-5 TCP #1-5
Offline Trap
Item
Configurati Network Card Setup
on Tool/
Network
(Windows) (Mac OS X)
Setting
Plug-in
- -
- -
- -
- -
- -
- -
- -
Item
Configurati Network Card Setup
on Tool/
Network
(Windows) (Mac OS X)
Setting
Plug-in
- -
- -
- -
- -
- -
- -
- -
Factory
Default
Setting
- (NULL)
- MD5
- (NULL)
- (NULL)
- DES
- public
- public
Factory
Default
Setting
- public
- 0.0.0.0
- Disable
- Disable
- Disable
- Disable
- Disable
- 138 -
Description
Sets the authentication key for SNMPv3
packet authentication in HEX code.
Maximum number of characters depends
on the algorithm you select.
Specifies the algorithm for SNMPv3
packet authentication.
Sets the password to create an
authentication key for SNMPv3 packet
encryption. From 8 to 32 characters can
be used.
Sets the authentication key for SNMPv3
packet encryption in HEX code. Sixteen
octets (32 characters of HEX code) can
be used.
Specifies the algorithm for SNMPv3
packet encryption. You cannot change
this value.
Sets the read community for SNMPv1 up
to 15 characters.
Sets the write community for SNMPv1
up to 15 characters.
Description
Sets the community name for a printer
trap up to 31 characters.
Specifies a trap destination in TCP/IP.
You can specify up to 5 destinations.
Specifies whether to use a printer trap in
TCP #1-5.
Specifies whether to send an SNMP
message when the machine has
rebooted.
Specifies whether to use a trap when a
community name other than the one set
in [Printer Trap Community Name
Set] is used to access the machine.
Specifies whether to send an SNMP
message every time the machine comes
online.
Specifies whether to send an SNMP
message every time the machine goes
offline.