Toshiba e-STUDIO 332s User Manual Advanced page 93

PCL Print Margin
Setup
Pen Width Adjust
Tray ID#
PS Setup L1 Tray
(e-
STUDIO403S
Only)
SIDM SIDM Manual ID#
Setup
SIDM Manual2 ID#
SIDM MP Tray ID#
SIDM Tray1 ID#
SIDM Tray2 ID#
IBM PPR Character Pitch
Setup
Font Condense
Character Set
Symbol Set
Letter O Style
Zero Character
Line Pitch
White Page Skip
CR Function
LF Function
Line Length
Form Length
TOF Position
Left Margin
Fit to Letter
Text Height
Item
Tray1
Tray2
MP Tray
(e-STUDIO403S Only)
Manual Feeder (e-
STUDIO332S Only)
List of the Device Setting Menu Items
Factory
Default
Normal Sets the area of the page that is
nonprintable.
ON Sets whether the thinnest line width is
emphasized to look wider.
1 Sets a number to tray 1, 2, MP tray (e-
STUDIO403S Only) , and Manual Feeder
5
(e-STUDIO332S Only) for the paper feed
4
destination command inPCL emulation.
Available range: 1 to 59. Display condition
for [Tray 2]: the second tray unit is
2
installed.
TYPE 1 Sets a type of tray numbering in Post-
Script print job.
When [TYPE1] is selected: the tray num-
bering starts from 0.
When [TYPE2] is selected: the tray num-
bering starts from 1.
2
3
Sets a number to SIDM Manual, MP and
4
Tray ID.
1
5
10 CPI Specifies character pitch in IBM PPR emu-
lation.
12CPI to Specifies 12CPI pitch for Condense Mode.
20CPI
SET-2 Specifies a character set.
IBM-437 Specifies a symbol set.
Disable Specifies the style that replaces 9BH with
letter o and 9DH with a zero.
Normal Sets the zero to be slashed or unslashed.
6LPI Specifies the line spacing.
OFF Selects whether blank pages are printed
or not.
CR Selects whether a received carriage return
character (0Dh) also causes a line feed.
LF Selects whether a received line feed char-
acter (0Ah) also causes a carriage return.
80 Column Specifies the number of characters per line.
11 or 11.7 inch Specifies the length of paper.
0.0inch Specifies the distance of print from the top
edge of the paper.
0.0inch Specifies the distance of print from the left
hand edge of the paper.
Disable Sets the printing mode that can fit print
data, equivalent to 11 inches (66 lines), in
the LETTER-size printable area.
Same Sets the height of a character.
SAME: Regardless of CPI, same height
DIFF: As CPI, character heights vary.
- 93 -
Description
6