Toshiba e-STUDIO 332s User Manual Advanced page 91

Print Print Setup
Menu
Printer Adjust
Item
Copies
Duplex
Binding
Resolution
Toner Save Mode
Orientation
Lines Per Page
Edit Size
Width
Length
Manual Timeout
Wait Timeout
Timeout Local
Timeout Net
Jam Recovery
Paper Black Setting
Darkness
SMR Setting
BG Setting
List of the Device Setting Menu Items
Factory
Default
1 Sets the number of copies of a document
to be printed. For local printing, this set-
ting is invalid except for demo data. Avail-
able range: 1 to 999.
OFF Sets whether to use the duplex function
by default.
Long edge Sets the default binding position for
bind duplex printing.
600dpi Sets the resolution.
OFF Sets whether to use the toner save mode.
Portrait Selects the page orientation.
60 or 64 lines Sets the number of lines of text per page (for
PCL only). The default number of lines for A4
portrait is 64. The default number of lines for
Letter portrait is 60. The number differs
depending on the size of paper on the feed
tray.
Cassette size Sets the size of the printable page area to
match the size of the paper when there is
no specification by the command of paper
edit size specification from the computer.
It is unavailable in PS.
210 mm (8.3 Sets the default width of the custom size
inch) or 8.5 paper. Available range: 86 to 216 mm (3.4
inch (216 mm) to 8.5 inches).
297 mm Selects the default length of the custom
(11.7 inch)
size paper. Available range: 140 to 1321
or 11 inch
mm (5.5 to 52.0 inches).
(279 mm)
60 seconds Sets how many seconds the machine will wait
for paper to be fed before cancelling a job.
40 seconds Sets how many seconds the machine will
wait when received data pauses before
forcing a page eject. A PS job is canceled
if timeout occurs.
40 seconds Sets the time of open of each port after
end of job. (The network is excluded.)
90 seconds Sets the time of open of Network port
after end of job.
Enable Sets whether the machine will attempt to
re-print any pages lost due to a paper jam
once the jam has been cleared.
0 Sets values to make a fine adjustment to
very visible faded print results or light
specks (or streaks) results in plain paper
black setting.
0 Sets print darkness.
0 Corrects variations in print results caused
by temperature and humidity conditions
and differences in print density and fre-
quency. Change the setting if the print
quality is uneven.
0 Corrects variations in print results caused
by temperature and humidity conditions
and difference in print density and fre-
quency. Change the setting if the back-
ground is dark.
- 91 -
Description
6