Toshiba e-STUDIO 332s User Manual Advanced page 92

List of the Device Setting Menu Items
Print Print Position
Menu Adjust
Drum Cleaning
Hex Dump
System Personality
Configu-
ration
Menu
Alarm Release
Auto Continue
Error Report
PCL Font Source
Setup
Font No.
Font Pitch
Font Height
Symbol Set
A4 Print Width
White Page Skip
CR Function
LF Function
Item
Front X Adjust
Front Y Adjust
Back X Adjust
Back Y Adjust
Factory
Default
0.00 mm Adjusts the position of the whole printing
image perpendicular to the direction of
paper movement. Available range:
mm (0.25 increments).
0.00 mm Adjusts the position of the whole printing
image parallel to the direction of paper
movement. Available range:
(0.25 increments).
0.00 mm Adjusts the position of the image on the
reverse side of a duplex print perpendicu-
lar to the direction of paper movement.
Available range:
ments).
0.00 mm Adjusts the position of the image on the
reverse size of a duplex print parallel to
the direction of paper movement. Avail-
able range:
OFF Sets whether to do cleaning of a drum
before printing. It may have an effect for
improvement of image quality.
OFF Prints out the data received from the host
computer in hexidecimal code. To finish
printing, turn off the power.
Auto Emula- Selects the emulation mode. When set to
tion auto, the correct emulation is automatically
selected each time a print job is received.
Manual When [Manual] is selected, non-critical
warnings, such as requests for a different
paper size, can be cleared by pressing the
<RESET/LOG OUT> key. When [Auto] is
selected, they are cleared when the print
job resumes.
OFF Sets whether the machine automatically
recovers from a memory overflow.
OFF Sets whether to print error details when
PostScript errors occur.
Resident Selects the location of the font to use.
I0 Selects the number of the font to use.
Available range: I0 to I90 when [Resi-
dent] is set.
10.00 CPI Sets the width of the PCL default font.
Available range: 0.44 to 99.99 CPI
(0.01CPI increments).
12.00 point Sets the height of the PCL default font.
Available range: 4.00 to 999.75 point.
(0.25 point increments)
PC-8 Selects a PCL symbol set.
78 Column Sets a number of digits for automatic line
feed on A4 paper.
OFF Selects whether to print blank pages.
CR Sets the machine operation when receiv-
ing CR code.
LF Sets the machine operation when
receiving LF code.
- 92 -
Description
±
2.00 mm
±
2.00 mm (0.25 incre-
±
2.00 mm (0.25 increments).
±
2.00