Wine Guardian WG15 Installation, Operation And Maintenance Manual page 30

Deg F or Deg C
Low temperature
alarm set point
High temperature
alarm set point
Low humidity
alarm set point
High humidity
alarm set point
Add or remove
humidifier
Fan AUTO or ON
30
Setting 1

Press the "Down" arrow to change temperature
from Deg F to Deg C.

Press the "Up" arrow to change temperature
from Deg C to Deg F.
Setting 2

Press "Settings" button to advance to Setting 2.

Press the "Up" or "Down" arrow buttons to
adjust to the desired set point. Factory default
is 50 Deg. F.(10 Deg C)
Setting 3

Press "Settings" button to advance to Setting 3.

Press the "Up" or "Down" arrow buttons to
adjust to the desired set point. Factory default
is 65 Deg F. (18 Deg C)
Setting 4

Press "Settings" button to advance to Setting 4.

Press the "Up" or "Down" arrow buttons to
adjust to the desired set point. Factory default
is 5%.
Setting 5

Press "Settings" button to advance to Setting 5.

Press the "Up" or "Down" arrow buttons to
adjust to the desired set point. Factory default
is 95%.
Setting 6

Press "Settings" button to advance to Setting 6.

Press the "Up" or "Down" arrow buttons to
adjust to the desired set point. Factory default
is zero (0).
Zero (0) = No humidifier
One (1) = Integral Wine Guardian mounted
(internal)
Two (2) = Stand-alone remote mounted
humidifier
Setting 7

Press "Settings" button to advance to Setting 7.

Press the "Up" or "Down" arrow buttons to
adjust number to the desired set point. Factory
default is zero (0).
Zero (0) = Auto – fan only turns on when
there is a call for cooling or heating or
humidity
One (1) = Fan On – fan remains on
continuously