Table of Contents
Advertisement
Installation
Verifying the System
2. A sequence of 2-digit status codes appear on the front panel in the "Processors" display.
These status codes progress from 0 to 51 as the Service Processor goes through its
selftest. When the display reads 51, the Service Processor has successfully completed its
selftest. The fans in the front of the cabinet turn on. (Depending on the version of
firmware, the highest numbered SP selftest may be different than 51.)
3. Assuming that you have switched the "Standby-Ready" switch to the "Ready" position,
the computer continues its startup process: The system goes through the standard SPU
selftests (PDC selftests). The time to complete these selftests is configuration
dependent; for example, systems with lots of memory will take more time.
3-50
Chapter 3
Advertisement
Table of Contents
