HP 3000 99x Family Installation Manual page 107

iii. To set an alternate boot path of 0/12.0.3 (for an HP-IB device):
Boot> PA A 0/12.0.3
iv. To set console path of 0/44.0:
Boot> PA C 0/44.0
5. When you are satisfied with the hardware path values, continue to the next section.
6. If you would like more information on boot commands, access the on-line help screens
by pressing HE:
Boot> HE
------- Boot Commands Help ------------------------------------------------
Contents:
I. RECOMMENDED PATHS
Primary:
Alternate (SCSI dev):
Alternate (HP-IB dev):
Console:
In the above help text, the value for Alternate (SCSI dev) on systems
NOTE
with an HP-FL system disk should be 0/36.0.0.
Chapter 3
I. RECOMMENDED PATHS
II. BOOT COMMAND DESCRIPTIONS
III. WHAT IS A PATH?
IV. PATH FORMAT
With SCSI system disk
0/52.6.0
0/52.0.0
0/12.0.3
0/44.0
With HP-FL system disk
0/52.0
0/36.1.0
0/12.0.0
0/44.0
Installation
Setting Boot Parameters
3-59