Installation
Installing the Remaining Peripherals
2. Connect the cables in the configuration shown in Figure 3-25.
Connecting Other BC Cards
If the PMB card cage contains more than one BC or HP-HSC I/O Bus Converter card
(997/T600), connect them to lower-port BC cards in external HP-PB card cages.
Connect the ribbon cables as described in the above procedure.
Figure 3-25
Flat Ribbon Cables Connecting an External HP-PB Card Cage
MUX Connections and MDPs (Model T-Class Only)
The Model T-Class support the 8-port MUX, the 16-port MUX, and 32-port MUX cards. A
16-port MUX card is supplied with the base configuration.
MUX cards attach to an Modem Distribution Panel (MDP) which provides connectors for
modems, terminals, etc. MDPs are mounted in the rear of an expansion cabinet, on an
MDP mounting bracket.
3-66
Chapter 3