Table of Contents
Advertisement
HP-PB I/O Cards
One HP-PB I/O card cage is located in the base of the SPU system cabinet. Figure 3-13
shows the minimum I/O cards installed in the 991/995/996 Systems.
Minimum configuration for the Model T-Class is similar, except that it has a MUX-16
card in slot 7. Also, the T-Class System base configuration does not include a PB-FL
card.
Minimum configuration for the 990/992 Systems is also similar, except that it does not
support MUX cards.
Figure 3-13
HP-PB I/O Card Cage Slots (991/995/996)
Check to make sure that I/O cards have been properly installed at the factory:
Chapter 3
Installation
HP-PB I/O Cards
3-29
Advertisement
Table of Contents
