Figure 3-21 Keyed Duplex Optical Fiber Cable; Figure 3-22 Hp-Fl Board Connections - HP 3000 99x Family Installation Manual

Figure 3-21 Keyed Duplex Optical Fiber Cable
The location of the Transmit (Tx) and Receive (Rx) optical connectors of the HP-FL board
are shown in Figure 3-22. The barrel housings of the HP-FL board's optical connectors are
also color-keyed. The Transmitter housing is light-gray and the Receiver housing is
dark-gray. To attach the fiber cable connectors to the optical barrel housings on the HP-FL
board:
1. Grasp the metal housing of the fiber cable connector.
2. Insert the fiber into the appropriate optical barrel housing.
3. Rotate the metal housing CLOCKWISE.
Figure 3-22 HP-FL Board Connections
Chapter 3
Installation
Installing the System Disk and Tape
3-45