Table of Contents
Advertisement
5.1 changing channels
There are different ways to change channels with your new receiver:
Via direct access using the 0~9 buttons.
„
„
Via the channel list through the ok button.
„
„
Via the p/q or p+ and p- buttons.
„
„
5.1.1 Direct access
To directly access a channel, simply enter its number with the 0~9 buttons on the remote control. Channel
numbers can be up to four digits long. Entering a number with less than four digits is possible. Just wait a few
seconds and your receiver will switch to the channel number or just press ok after inserting.
5.1.2 channel list
Press ok in viewing mode to display the channel list. Use p/q in the list to highlight your preferred channel
and press ok to switch to this channel. To scroll to the next or previous 9 channels you can also use the p+/p-
buttons. Using the t/u buttons allows you to toggle between the TV and radio channel list.
To directly change from TV to radio mode press the Tv/R button.
By pressing the fav button in viewing mode you can open the FAV group selection, if a favourite list has
been created. If more than one FAV list has been created then you can use the t/u buttons to toggle
between the different FAV groups: Movies, News, Sports and Music.
5.1.3 Using p/q or p+/p-
p switches to the next channel.
q switches to the previous channel.
p+ switches to the next channel.
p- switches to the previous channel.
5.2 adjusting volume and audio
To adjust the volume you can use the v+/v- or t/u buttons. To mute the audio output, use !, to enable
the audio output again, press ! again.
Some channels support a choice of different audio formats and/or languages. To select another audio
language, press aUDIo in viewing mode. A list with available audio languages will be displayed. Use
p/q to select the desired language and confirm with ok. The audio channel as stereo, mono left and
mono right can be selected with the t/u buttons.
5.3 Info banner
Every time you switch to a channel, the info banner is displayed. While watching TV you can press the
button to display it again to access information about the current channel and event. Press
detailed programme and technical information.
5.3.1 standard information banner
The following information will be provided:
Channel number and name
„
„
Current date and time
„
„
Start and end time of the current event*
„
„
Start and end time of the next event *
„
„
Icons, showing the presence of additional services provided and some properties of this
„
„
channel:
— The channel is broadcasted in standard definition resolution.
— The channel is broadcast in high definition resolution.
— Green colour indicates the presence of Teletext.
— Green colour indicates the presence of DVB subtitles.
i
i
twice for
7
Advertisement
Table of Contents
